PRODUCT CARE

SPECIAL NOTE FOR SLIDING REAR WINDOW INSTALLATIONS:

If your vehicle is equipped with a sliding rear cab window, it is recommended that you wait one (1) week before sliding the window.  This will insure that the pressure-sensitive adhesive is securely attached to the glass.

CAR WASHING

Avoid washing your GLASSCAPES window graphic for the first week after it is installed.  After this time you can safely take your vehicle thru any commercial brush-type car wash.

HIGH PRESSURE POWER WASHING

If you are using a do-it-yourself car wash, do NOT hold the wash wand closer than ten (10”) inches to the GLASSCAPE surface.  Use the same care that you would with any pin striping or vinyl graphic on your vehicle and you should enjoy many years of use from you GLASSCAPE image.

COLD CLIMATE

WINTER USE

Avoid using ice scrapers on the image as this may damage the vinyl.

HEATED REAR WINDOWS

Heated rear window systems will not cause any damage to your GLASSCAPE.  Use of your rear window defroster will help speed up drying of your glass during wet weather use.

WET WEATHER SAFETY TIP

Rain can collect in the small holes and reduce vision.  Use a towel to dry the surface of the GLASSCAPE image for a clear view prior to driving your vehicle.

A NOTE OF CAUTION

• Do NOT use abrasive cleaners on the image!
• Rear window mounted wiper blades will cause premature wear of the image.
• DO NOT use car wax/polish or products such as Rain-X® on your graphic.  They can plug up the holes and reduce your vision from inside.